![DIYTyler](/img/default-banner.jpg)
- 365
- 36 800 682
DIYTyler
Приєднався 2 лют 2010
I DIY for better results, to save tons of money and the satisfaction of doing it myself! If I can do it, you can too!👍🏻
We all cringe when we need to pull out our wallets to pay for work, and it breaks our heart when the work is not quite up to par. If that has been your experience, like mine,
Subscribe and realize that if I can do it, you can too!
DIYTyler
PO Box 293
Armada, MI 48005
Disclaimer: I'm not an expert so don't do what I do, all content is shown for the sole purpose of entertainment and is not intended for educational purposes in any format. Anyone choosing of their own free will to reenact or recreate any of this content assumes all personal liability and or responsibility by doing so. Woodworking especially with power tools is very dangerous and can result in serious bodily harm or even death, therefore proper education and training is advised.
We all cringe when we need to pull out our wallets to pay for work, and it breaks our heart when the work is not quite up to par. If that has been your experience, like mine,
Subscribe and realize that if I can do it, you can too!
DIYTyler
PO Box 293
Armada, MI 48005
Disclaimer: I'm not an expert so don't do what I do, all content is shown for the sole purpose of entertainment and is not intended for educational purposes in any format. Anyone choosing of their own free will to reenact or recreate any of this content assumes all personal liability and or responsibility by doing so. Woodworking especially with power tools is very dangerous and can result in serious bodily harm or even death, therefore proper education and training is advised.
They made fun of me...so I made one! Elegant Humidor Build
My brother has gotten me into cigars in the last year or so and it has been nice to enjoy the experience and the investment of time with others.
A friend joked about the purchased humidor that I presented so I decided that was the last time and it was a good idea to make a DIY Humidor!
Support our Sponsors who Support this Channel!
www.carolinashoe.com/
Get 20% Off SITEWIDE using code DADSDAY20 at checkout. Code expires 6/16/24 at 11:45pm ET.
This humidor is a simpled mitered box design but to spice it up I CNCed a honeycomb pattern around the entire box. The lid is held in place with morticed quadrant hinges.
Stuff I like (some affiliate links):
Miter Spring Clamps: amzn.to/2O8oYhv
FastCap 16oz Glue Bot: goo.gl/X5aNZ0
FastCap 4oz Babe Bot: amzn.to/1KEuIUf
Kreg R3: amzn.to/2OZy8gc
Kreg Panel Carrier: amzn.to/3uq7e8p
EDC Tool Belt: goo.gl/XZnWRx
IsoTunes Xtra: amzn.to/2NBu7zw
3M Respirator: goo.gl/ZexRQd
3M Respirator Filters: goo.gl/92Ejh0
Marr free Counter Sink bit: amzn.to/3ekojFK
10 Million Dollar Stick: amzn.to/2SrKvjS
Mixing Mate: amzn.to/2w699Bf
Nail Puller Pliers: amzn.to/37frZUq
Swanson Combination Square: goo.gl/EYuGAn
FastCap Tape Measure: goo.gl/t2lWJD
Brayer Roller: goo.gl/bc5uIE
Titebond TiteWrap: amzn.to/2F9AALM
Moisture Meter: amzn.to/2SwBy9i
Follow us: DIYTyler.com
diytylerg
DIYTyler/
#humidor #DIYhumidor #cigarhumidor
A friend joked about the purchased humidor that I presented so I decided that was the last time and it was a good idea to make a DIY Humidor!
Support our Sponsors who Support this Channel!
www.carolinashoe.com/
Get 20% Off SITEWIDE using code DADSDAY20 at checkout. Code expires 6/16/24 at 11:45pm ET.
This humidor is a simpled mitered box design but to spice it up I CNCed a honeycomb pattern around the entire box. The lid is held in place with morticed quadrant hinges.
Stuff I like (some affiliate links):
Miter Spring Clamps: amzn.to/2O8oYhv
FastCap 16oz Glue Bot: goo.gl/X5aNZ0
FastCap 4oz Babe Bot: amzn.to/1KEuIUf
Kreg R3: amzn.to/2OZy8gc
Kreg Panel Carrier: amzn.to/3uq7e8p
EDC Tool Belt: goo.gl/XZnWRx
IsoTunes Xtra: amzn.to/2NBu7zw
3M Respirator: goo.gl/ZexRQd
3M Respirator Filters: goo.gl/92Ejh0
Marr free Counter Sink bit: amzn.to/3ekojFK
10 Million Dollar Stick: amzn.to/2SrKvjS
Mixing Mate: amzn.to/2w699Bf
Nail Puller Pliers: amzn.to/37frZUq
Swanson Combination Square: goo.gl/EYuGAn
FastCap Tape Measure: goo.gl/t2lWJD
Brayer Roller: goo.gl/bc5uIE
Titebond TiteWrap: amzn.to/2F9AALM
Moisture Meter: amzn.to/2SwBy9i
Follow us: DIYTyler.com
diytylerg
DIYTyler/
#humidor #DIYhumidor #cigarhumidor
Переглядів: 8 907
Відео
Building a Nook Shelf with Curved Top and Trim
Переглядів 6 тис.21 день тому
When your daughter asks for a shelf on her birthday, what is a dad to do? I couldn't just make a regular shelf though, needed to add some spice to it by making the top a domed top shelf. I also make the trim curved in a way that showed off the natural grain pattern of the wood. Stuff I like (some affiliate links): Miter Spring Clamps: amzn.to/2O8oYhv FastCap 16oz Glue Bot: goo.gl/X5aNZ0 FastCap...
Revealing my Dream Build. Building an Elegant Glider Rocking Chair.
Переглядів 4,7 тис.Місяць тому
In this video I will finally be completing a build that I have always dreamed of. We will be building a gliding rocking chair for hour home. This glider chair is made from ash wood to match some of the other pieces in our house. Flatten Large Boards on a smaller Jointer: ua-cam.com/video/OyVrabLVuBc/v-deo.html Adjustable Circle Cutting Jig: ua-cam.com/video/vlUmTFrLDp4/v-deo.html Custom Cushion...
How to Steam Bend Wood and Testing the First Bent Lamination!
Переглядів 7 тис.2 місяці тому
Today we are going to be building a DIY modular steam bending box so we can experiment with all the steps required to steam bend wood! We will use this to bend some wood for a glider rocking chair I am building for practice. I need to understand everything required to steam bend wood so I can bend some wooden boat ribs in the future. Support the channel by supporting our sponsor, @CarolinaShoeC...
Couldn't Get it off with the Tractor! Stripping the Old Motor off our Boat | Wood Boat Restoration 2
Переглядів 3 тис.3 місяці тому
Today we are starting the first steps of restoring our 1960 Penn Yan Baltic wooden boat that I found abandoned after 21 years! In this video we will be making a sturdy DIY outboard boat motor and stripping off the 2 stroke V4 Evinrude motor off the boat. This DIY car will allow me to work on the motor off the boat but also allow a 55 gallon drum of water to sit under the motor. Support the chan...
Changing it out Already? Harvey Big Eye Rip Fence Upgrade
Переглядів 20 тис.4 місяці тому
Time for a change on the main tool in the shop already?! Yes, Harvey recently released their Big Eye rip fence system and asked to to install it on my Harvey Alpha table saw. This fence is a finely machined piece of tooling that is extremely smooth to operate and has ZERO deflection at any point of the fence. Check out Harvey's lineup: www.harveywoodworking.com/ Big Eye Rip Fence:www.harveywood...
Making a Hickory Live Edge Slab Cottage Table / Woodworking
Переглядів 36 тис.4 місяці тому
Making a Hickory Live Edge Slab Cottage Table / Woodworking
Crafting Dreams: Building a Solid Ash Wood Twin Bed for the Girls' Bedroom!
Переглядів 4,6 тис.5 місяців тому
Crafting Dreams: Building a Solid Ash Wood Twin Bed for the Girls' Bedroom!
$8 Patch Tape Saved $1000s with a DIY Carpet Repair just like a Pro!
Переглядів 4,3 тис.5 місяців тому
$8 Patch Tape Saved $1000s with a DIY Carpet Repair just like a Pro!
I bought an ABANDONED wooden boat! It will 100% SINK right now!
Переглядів 4,7 тис.6 місяців тому
I bought an ABANDONED wooden boat! It will 100% SINK right now!
Custom D&D Game Table Build - Whiteboard Game Surface and Secret Wireway!
Переглядів 7 тис.7 місяців тому
Custom D&D Game Table Build - Whiteboard Game Surface and Secret Wireway!
Is it a Frameless Frame?? DIY Live Edge Mirror Frame for Cheap using woodworking Scraps!
Переглядів 3,9 тис.7 місяців тому
Is it a Frameless Frame?? DIY Live Edge Mirror Frame for Cheap using woodworking Scraps!
I cut Apart my mostly New Desk to add a Sit Stand Section! ft. Fezibo Hardware. I LOVE it!
Переглядів 4 тис.7 місяців тому
I cut Apart my mostly New Desk to add a Sit Stand Section! ft. Fezibo Hardware. I LOVE it!
Epic DIY D&D Table Build - Custom Hard Maple Masterpiece!
Переглядів 10 тис.7 місяців тому
Epic DIY D&D Table Build - Custom Hard Maple Masterpiece!
Is it worth an upgrade? New Harvey MG-36 Miter Gauge Unboxing and Review + Giveaway
Переглядів 8 тис.8 місяців тому
Is it worth an upgrade? New Harvey MG-36 Miter Gauge Unboxing and Review Giveaway
Save $$$ and Create Your Dream Vanity on a Budget: DIY Tile Countertop with Schluter Profiles
Переглядів 17 тис.8 місяців тому
Save $$$ and Create Your Dream Vanity on a Budget: DIY Tile Countertop with Schluter Profiles
i'm done, becoming a Chicken Farmer | 15$ DIY Hanging Water Bucket. Portable Chicken Watering Bucket
Переглядів 4,1 тис.9 місяців тому
i'm done, becoming a Chicken Farmer | 15$ DIY Hanging Water Bucket. Portable Chicken Watering Bucket
Real Woodworking? Hand Cutting Cherry Bowties into a Massive Hickory Slab Table and Prep for Finish
Переглядів 3,6 тис.9 місяців тому
Real Woodworking? Hand Cutting Cherry Bowties into a Massive Hickory Slab Table and Prep for Finish
I Somehow managed to Fit a round Picture in a Square Frame! AND Almost broke the Picture Glass!
Переглядів 3,5 тис.10 місяців тому
I Somehow managed to Fit a round Picture in a Square Frame! AND Almost broke the Picture Glass!
🔥 Build Your Own DIY Deck / Patio Fire Table for $300! 🔥 | Step-by-Step Guide
Переглядів 14 тис.10 місяців тому
🔥 Build Your Own DIY Deck / Patio Fire Table for $300! 🔥 | Step-by-Step Guide
Pond Aerator Pump house with Solar capability! (Solar incoming soon!) Off-Grid Pump House
Переглядів 4,5 тис.11 місяців тому
Pond Aerator Pump house with Solar capability! (Solar incoming soon!) Off-Grid Pump House
Trying to Glue up the Largest Slab Table I have ever Made and Keep it Flat! EXTREME Weight!
Переглядів 7 тис.11 місяців тому
Trying to Glue up the Largest Slab Table I have ever Made and Keep it Flat! EXTREME Weight!
Testing out Using the SUN to run a pond Aerator Pump! EcoFlow Delta 2 MAX to beat Electric Peak $$!
Переглядів 3,4 тис.Рік тому
Testing out Using the SUN to run a pond Aerator Pump! EcoFlow Delta 2 MAX to beat Electric Peak $$!
6 Steps I take every time for Perfectly Aligned Drawer Front Installation on Furniture Projects
Переглядів 17 тис.Рік тому
6 Steps I take every time for Perfectly Aligned Drawer Front Installation on Furniture Projects
Building a Pedestal Game Table with a Removable Table Top. Add as a Table Extension for a 12' Table!
Переглядів 9 тис.Рік тому
Building a Pedestal Game Table with a Removable Table Top. Add as a Table Extension for a 12' Table!
Cons and Pros of the Harvey Alpha HW110s Table Saw! I can finally give you a good review!
Переглядів 38 тис.Рік тому
Cons and Pros of the Harvey Alpha HW110s Table Saw! I can finally give you a good review!
Found a $699 Round Coffee Table on Pottery Barn, Made it for $150 in the Shop! Woodworking Project.
Переглядів 20 тис.Рік тому
Found a $699 Round Coffee Table on Pottery Barn, Made it for $150 in the Shop! Woodworking Project.
Finishing our Master Shower: Installing a River Rock Shower Floor, Niche, and More!
Переглядів 17 тис.Рік тому
Finishing our Master Shower: Installing a River Rock Shower Floor, Niche, and More!
Every Step you Need to Install Large Format Tiles on a new Walk in Shower Wall! Tile walls 101
Переглядів 182 тис.Рік тому
Every Step you Need to Install Large Format Tiles on a new Walk in Shower Wall! Tile walls 101
Not even Sure what to Call this? Triple Half Lap Joint...Tripod Joint? Cool Technique & VERY strong!
Переглядів 5 тис.Рік тому
Not even Sure what to Call this? Triple Half Lap Joint...Tripod Joint? Cool Technique & VERY strong!
It's cheaper to buy a door frame.
Loved your instruction but please don't say the wife say my wife. Thanks again
Where is the list of material?
maybe I missed it but how did you attach your 4x4 post? thanks
Complaining about what tools he has... What do you think he started with... If you put your brain behind it you could get by with a saw and a router, or literally just a tablesaw.
How much cost? For screened porch part?
Truly helpful, thank you! I really would’ve liked to have seen how you installed the very last row against the wall however.
My flap always wraps around the pole , any idea how to change this ??
What’s the tool called when you dig the hole for hinges? Thanks
nice job, especially as a birthday request!
It’s painful listening to them Rigid tools struggle to operate, you should really invest in some Milwaukee tools..like the video other than that. Thanks
Do you have a DIY for interior doors?
Never heard of ''dados'' or the tool used to staple/nail the pieces togethrer. It'd be nice to be told what they are and give a little bit of info on them.
It does not help the portion of the world that does not own that placement jig for the balusters.... :-)
BAD choice .
Yet, 3 years later, looks as good as the day we sprayed it.
Hope that popcorn ceiling didn't have asbestos
How much was the total outlay?
What a beautiful family. The girl reminds me of my childhood. Today I still dress in skirts and boots or tennis shoes.
Dude why???? U should do it different ❤❤❤
Looks good except for the plastic corrugated walls. That looks cheap and tacky.
Where is this model made from china or Taiwan?
Cedar!?
I've added cedar wafers inside...was always the plan. Thanks for watching!
Russian dude never renewed his domain... 😢
can you just install it over the linoleum?
Nice humidor. I.would suggest trying a 1926 Anniversary Padron Madura. It doesn’t get much better than that.
That sounds great! I have so many to try after seeing all the comments!
That's gonna help so much for my project. I want to do a drying rack, but it folds in the height so that the hanging sticks come parallel to each other once folded.
Nice! Good luck with your build!
Amazing work! Try EP Carrillo “encore”, and Padron 1964 and 26
Thanks, so many to try!
Great build it turned out very nice
Thanks a bunch!
Cool box. Wouldn't have taken you for a cigar smoker. Definitely enjoy seeing more of your personality come through in the videos.
It's a new thing, last year or so. I didn't used to care for them, but I believe I never tried anything decen't until recently. Thanks for watching and being a long time subsriber!
Tyler, you knocked it out of the park! Absolutely stunning look and now that I’ve bought my CNC and expand into this world, I may have to make an amazing design and maybe a humidor. I used to have several humidors many years ago when I was into cigars. My favorites at the time were Cohibas, Rothmans, and when I wanted a dark cigar, Onyx and Maduro. That honeycomb pattern looks amazing and wish you do more CNC projects. And as a side note, always seems like your dust bin light or going off. Come on man!!! 🤣
lol, this was a one day built.....so yea, filled the dust bin and just kept on trucking! Thanks for the suggestions and for watching!
Random question, but does anyone know or recognise the watch model?? ⌚
Nothing special! It's a timex expedition. Thanks for watching!
Wish you talked about how you dealt with the ceiling not being level and the tapered tile from left to right.. and then if you decided to leave it like that or if you put some sort of molding over that.
Try the Rocky Patel 1999. They are on the mild side and very smooth
Thanks for the suggestion! Have had a few RPs, so far so good!
Hi Tyler, Have you ever tried Cohiba cigars? They are just heaven!
I haven't yet! Thanks for watching!
Deffo need a Spanish cedar lining. Not just for humidity but to eliminate those pesky microscopic bugs that love to bury themselves in the cigars. Spanish cedar is poisonous to them.
I have added cedar wafers. Thanks for watching!
You should check out Blake Weber’s humidor build! He set up a whole jig and used a palm router to cut his box out!
Will take a look, thanks for watching!
cedar and why the wraps around the cigars?
Watching this video…….while having a cigar. Cheers
Doesn't get better than that, thanks for watching!
Beautiful humidor. Staining it was definitely the right way to go for the finish. Also, just an fyi, it’s actually hygrometer, not hydrometer.
Thanks for the info!
Great job it turned out great
Thanks!
A thin layer of Spanish cedar will help with humidity and longevity of the cigars. One of my go to smokes is a Monte Cristo White Label #2
I have added cedar wafers! Have had a few Monte Cristo's, all very good so far!
Sorry, but not a fan of the inside where you appiled the silcone. Looks terrible on the inside oif the lid.
Do you have any issues with holes from the corner clamps? I make boxes and don't really want to be filling up holes, no matter how small.
Will always get little dimples, a drop of water on the hole will often pop it out.
Nice, but no Spanish Cedar?
Have added cedar wafers in there!
Plasencia sixto I & II are my favorites
Nice! Haven't had a Plasencia yet, thanks for the suggestion!
I enjoy smoking a pipe. I really love cult blood red moon or chocolate mousse.
@DIYTyler You could have simply told your friends that you don't need to fill a box with ego, just cigars. Keep doing what makes you happy, just don't burn anyone in the process.
lol! Good stuff!
Weed wrapped with a grape swisher sweet cigar seems to be popular around my village
Hmm, will take a pass there!
Perdomo 10th Anniversary Champagne are my favorites. Also I think your dust collector is full. That red light was flashing the whole video. 😜
I haven't enjoyed a Perdomo yet, but have heard they are good. Yes, filled the dust bin and kept on trucking!
We’ll done. I smoke mostly Oliva cigars, V Series when I splurge. Their budget brand Flor de Oliva are available from Atlantic Cigars online for about $2.50 a stick. Good value.
Cannot beat an Oliva V Double Toro! Spotted the different Oliva labels in Tyler’s new box. Nice to see he is a fan too.
I have a few Oliva's but haven't gotten around to them yet! Thanks for the suggestion